High-Pressure Hydro Jetting for Boise Homes
When a cable keeps punching through the same spot without actually solving anything, the problem usually isn't a single blockage. It's grease, mineral scale, or root growth coating the full length of the pipe. Hydro jetting uses high-pressure water to scour the entire interior wall clean, not just clear a path through the middle. For lines that keep clogging no matter how many times they're cabled, this is usually the fix that actually holds.
What Makes Jetting Different From a Cable
A cable, no matter how sharp the cutting head, does one thing: it opens a path through whatever is blocking the pipe. Whatever coats the walls on either side of that path stays exactly where it was, which is why a line that gets cabled every few months keeps needing it again.
Hydro jetting works differently. A flexible hose fitted with a specialized nozzle feeds into the line, and water under high pressure, typically in the 3,000 to 4,000 psi range, sprays outward and backward as the hose advances. That spray pattern scours grease, scale, and debris off the entire interior surface of the pipe rather than boring a single channel through the center. The nozzle itself matters too. A penetrating nozzle leads with a forward jet to punch through a blockage first, while trailing jets clean the walls as the hose gets pulled back out. Root cutting nozzles add a rotating blade to shred root intrusion while the water clears the debris away.
The result is a pipe that's closer to its original diameter afterward, not just a pipe with a hole punched through whatever was clogging it. That's the reason jetting costs more than snaking, and also the reason drain cleaning Boise ID homeowners rely on holds up longer for the right kind of problem.
How a Jetting Job Actually Runs
Camera Inspection First
Before any water goes in, we run a camera down the line to confirm the pipe's condition and rule out a collapse or offset that pressure could make worse. This step isn't optional on anything beyond a simple fixture line.
Pressure and Nozzle Selection
Based on what the camera shows, we choose the pressure setting and nozzle type. Older cast iron or clay lines get a gentler setting than a modern PVC line in good condition.
The Jetting Pass
The hose feeds down the line while water scours the interior wall. We work the full length methodically rather than rushing through, since a partial pass leaves buildup behind exactly where it started.
Confirm With a Follow-Up Look
A second camera pass on larger jobs confirms the pipe is actually clean, not just clear enough to pass water for now.
What Hydro Jetting Costs in Boise
Jetting is priced by line length, how much buildup has to be cleared, and whether a camera inspection is needed first. A branch line with moderate grease costs less than a full main line with years of scale and root growth. We confirm your price after the camera look, before the water pressure gets turned on.
| Service | Typical Cost |
|---|---|
| Branch line jetting | $265 to $420 |
| Main line jetting | $420 to $780 |
| Grease-heavy kitchen line | $475 to $850 |
| Camera inspection | included with most jetting jobs |
These figures assume a residential line in reasonably accessible condition. A line with a confirmed structural problem, like a bellied section or a partial collapse, may need repair work priced separately, which we'll always show you on camera before recommending it.
When Jetting Makes More Sense Than Snaking
Jetting isn't the default answer for every clog, but it's the right one for a specific set of situations we see regularly around Boise.
- ✓ A line that's been cabled more than once for the same clog, since a cable clears a path but leaves the cause behind
- ✓ A kitchen line with a history of grease buildup, which coats the full interior rather than sitting in one spot
- ✓ A camera-confirmed root intrusion, where a cutting nozzle clears growth around the pipe's full circumference
- ✓ A main line serving an older home with a long service history and no record of ever being cleaned
- ✓ Before listing a home for sale, so a buyer's inspection doesn't turn up a slow-draining line as a surprise
A single, isolated clog with no history of recurrence usually doesn't need jetting. We'll tell you honestly when a standard cable is enough, rather than upselling pressure work a line doesn't need.
A Root Intrusion Job Cleared With a Camera and a Jetter
Confirming the problem before clearing it is the whole point of pairing a camera with a jetter. Here's what one Boise homeowner had to say about that exact combination.
"Exceptional service from start to finish. They used a camera line inspection to show us exactly where tree roots were intruding into our pipes, then cleared it all out smoothly. Fair rates and no hidden fees—I won't be calling anyone else for drain issues in Boise."
Why Boise Homeowners Choose Us for Jetting
Jetting equipment is only as good as the judgment behind it. Full pressure isn't the right setting for every pipe, and knowing that difference is what separates a clean line from a damaged one.
- ✓ We camera-inspect before jetting on anything beyond a simple fixture line, so we know the pipe's condition before applying pressure
- ✓ We adjust pressure for pipe age and material, protecting older cast iron and clay lines from damage
- ✓ We carry root cutting and penetrating nozzles, matched to what the camera actually shows
- ✓ We quote one flat price after inspection, with no surprise add-ons once the work starts
- ✓ We guarantee the work, so a recurrence tied to our workmanship gets addressed at no extra cost
Hydro Jetting Questions From Boise Homeowners
What actually happens during hydro jetting?
A hose fitted with a rotating nozzle sends pressurized water, typically 3,000 to 4,000 psi, through the full length of the line, scouring grease, scale, and debris off the interior pipe wall rather than just punching through a single blockage.
Why does jetting cost more than snaking?
Jetting clears the entire pipe wall, not just a path through one clog, and requires specialized equipment plus a camera inspection to confirm the pipe can handle the pressure. That extra thoroughness is what the price reflects.
What does hydro jetting cost in Boise?
A single branch line typically runs $265 to $420. A full main line runs $420 to $780, and a grease-heavy kitchen line can run $475 to $850. The exact price depends on length, material, and buildup, confirmed after a camera look.
Is high-pressure water safe for an older pipe?
Yes, when the pressure is set correctly. We run a camera first to assess the pipe's condition and use lower pressure on older cast iron or clay lines showing wear, rather than defaulting to full pressure on every job.
Do you always run a camera before jetting?
On anything beyond a simple fixture line, yes. It confirms the pipe doesn't have a collapse or offset that jetting could worsen, and tells us what pressure and nozzle to use.
Can jetting actually clear tree roots?
With a root cutting attachment on the nozzle, yes. It clears growth from the full circumference of the pipe instead of just cutting a path through it the way a cable does, which is why regrowth takes longer to become a problem again.
How long does a jetting job take?
A single branch line usually takes 45 minutes to an hour including the camera inspection. A full main line with heavy buildup can take two hours or more.
Is jetting covered by a guarantee?
Yes. If the same line backs up again due to our workmanship within the guarantee period, we return and address it at no additional charge.
Tired of the Same Drain Backing Up?
If cabling keeps buying you a few weeks and nothing more, the pipe itself needs attention, not another patch. Call now to talk through what's actually happening, or request a free estimate online and we'll follow up the same business day with a camera-confirmed plan and one flat price.
Drain Cleaning Services in Boise
Residential
- ✓ Clogged Drain Clearing
- ✓ Drain Snaking
- ✓ Hydro Jetting
- ✓ Video Camera Drain Inspection
- ✓ Root Removal
- ✓ Sewer Line Cleaning
- ✓ Bathroom Drain Cleaning
- ✓ Kitchen Drain Cleaning
- ✓ Toilet Drain Cleaning
- ✓ Laundry Drain Cleaning
- ✓ Basement Drain Cleaning
- ✓ Roof Drain Cleaning
- ✓ Downspout Drain Cleaning
- ✓ Preventative Drain Maintenance
- ✓ Emergency Drain Cleaning
- ✓ Drain Odor Diagnosis and Removal
- ✓ Slow Drain Diagnosis and Repair
- ✓ Vent Stack Cleaning
- ✓ Water Leak Detection
- ✓ Floor Drain Cleaning
Commercial
Where We're Based
Based at 2401 S Orchard St in Boise, ID, with jetting rigs out serving the surrounding area throughout the week.